Arduino Based Mailbox Alert With KY-031 Shock Sensor

Hello world! I made a simple example project for the KY-031 sensor. In this tutorial I made a simple mailbox alert. Of course you can use this code for something else that produces shocks that you want to be notified of.

Step 1: What You Need?

1 x Arduino UNO
1 x USB Type-B Cable 
1 x RGB LED or 3 Color LED Module KY-016 or Other LED 
1 x Shock Sensor KY-031
1 x Buzzer or Buzzer Module KY-012 or PWM Digital I/O Output 5v Buzzer Piezo Module
Female-to-Male Jumper Wires
1 x Computer with Arduino IDE installed

All Sensor Module ( include KY-016, KY-031, KY-012) can be found in 37 Types Sensor in 1 Starter Learning Sensor Kit


Optional
1 x Mini Breadboard
Male-to-Male Jumper Wires 
USB To Power Jack Cable

Multicore Wires 

Don't have components? Don't worry. Just click the component's name. 

Step 2: Build Your Circuit.

Connect wire like the schematic above.

Step 3: Upload The Code.

Download:

Arduino IDE

Source: http://www.instructables.com/id/MAILBOX-ALERT-With-the-KY-031-Shock-Sensor/

Unknown

Author & Editor

My Robot Education Sdn. Bhd. (Robotedu.my) was founded in 2015 as the first robotics education centre in Malaysia to provide Arduino-based robotics courses for youths. Our vision is to be able to provide robotics education to every youth in Malaysia.