String to Int Function

The toInt() function allows you to convert a String to an integer number.

In this example, the board reads a serial input string until it sees a newline, then converts the string to a number if the characters are digits. Once you've uploaded the code to your board, open the Arduino IDE serial monitor, enter some numbers, and press send. The board will repeat these numbers back to you. Observe what happens when a non-numeric character is sent.

Step 1: What You Need?

1 x Arduino Board ( Arduino UNO R3 used in this tutorial.)
1 x USB Type-B Cable 


Optional 

Arduino Uno R3 Acrylic Transparent Casing

Arduino Compatible UNO Ultimate Starter Kit / Learning Kit

Don't have components? Don't worry. Just click the component's name. 

Step 2: Build Your Circuit.

There is no circuit for this example, though your board must be connected to your computer via USB and the serial monitor window of the Arduino Software (IDE) should be open.

Step 3: Upload The Code.

1. Select the Arduino board type: Select Tools >> Board >> Select your correct Arduino board used.

2. Find the port number by accessing device manager on Windows. See the section Port (COM&LPT) and look for an open port named "Arduino Uno (COMxx)". If you are using a different board, you will find a name accordingly. What matters is the xx in COMxx part. In my case, it's COM3. So my port number is 3.

Select the right port: Tools >> Port >> Select the port number.

3. You can find this code in the example of Arduino IDE.

Select File >> Examples >> 08. Strings >> StringToInt

Click press the "upload" button (see the button with right arrow mark).

Download:

Arduino IDE

Sources:https://www.arduino.cc/en/Tutorial/StringToInt

Unknown

Author & Editor

My Robot Education Sdn. Bhd. (Robotedu.my) was founded in 2015 as the first robotics education centre in Malaysia to provide Arduino-based robotics courses for youths. Our vision is to be able to provide robotics education to every youth in Malaysia.